In this long-awaited live episode of HVAC School, host Bryan Orr reunites with three industry veterans — Jim Bergmann of measureQuick, Roman Baugh (Kalos), and Andrew Greaves of NAVAC — to tackle one of the most pressing and underaddressed challenges in modern HVAC: performing refrigerant recovery and system evacuation in extreme cold-weather conditions. The conversation was sparked by a real-world observation from technician Chris Hughes, who relocated from Louisiana to Minnesota and quickly discovered just how different — and difficult — cold-climate HVAC work can be. What follows is an honest, science-heavy, and often humorous deep dive into a problem the industry has largely ignored.
The episode centers on the growing prevalence of cold-climate heat pumps, especially inverter-driven systems capable of operating at extremely low outdoor temperatures. As these systems become the primary heating source in cold regions, technicians are increasingly being called to make repairs — and perform evacuations — in sub-zero conditions. The group walks through why this is such a challenge, examining the fundamental physics that make pulling a proper vacuum nearly impossible once temperatures drop below 40°F. The conversation draws heavily from refrigeration science principles that, as Jim Bergmann bluntly points out, were largely left out of HVAC trade education over the past several decades.
One of the most compelling moments of the episode is Andrew Greaves' introduction of the "heat provocation test," a term he coins on the spot to describe a technique for verifying whether moisture has truly been removed from a system by observing micron gauge behavior after applying external heat to cold-soaked components. This sparks a rich debate between Jim and Andrew about where moisture actually concentrates in a system — in the line set vs. the outdoor unit — and whether heat can realistically reach those areas in a real-world installation. The panel ultimately agrees that heat is the only viable tool when you absolutely must complete a job in cold conditions, but that prevention and scheduling remain the gold standard.
The episode closes with a fascinating dive into the phase diagram of water, specifically the concept of the "triple point" and how it governs moisture behavior at low pressures. Andrew uses a whiteboard diagram to explain why, below 4,500 microns, moisture can only exist as vapor or solid — not liquid — and why that makes sublimation the only removal pathway when heat is absent. Jim adds nuance by describing the self-refrigerating cycle that occurs during deep vacuum pulls, a phenomenon that makes the problem progressively worse the deeper you pull without adding heat. The group wraps up with practical field takeaways and a promise to revisit the topic, including the potential role of nitrogen purging and triple-evacuation techniques in cold-weather scenarios.
Topics Covered
You can watch the original livestream on YouTube HERE.
Learn more about the book Review of Vacuum for Service Engineers or purchase it from TruTech Tools.
Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.
Purchase your tickets or learn more about the 7th Annual HVACR Training Symposium at https://hvacrschool.com/symposium.
Subscribe to our podcast on your iPhone or Android.
Subscribe to our YouTube channel.
Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android.